|
|
The "Mobius" Vertical Steam Plant
|
MSRP: $1,399.99
Offered at:: $1,199.99
You Save: $200.00 (14%)
Preorders for this batch are being accepted now. Contact us for futher details.
Item Number: 10060
Manufacturer: Monahan Steam Models, Inc.
Manufacturer Part No: 10060
The "Mobius" Vertical Steam Plant
The “Mobius Vertical Steam Plant” like our smaller range of oscillator steam plants is a compact and very
powerful steam plant for its size. Intended for use in larger models such as
Open Steam Launches where a more powerful steam plant is required, this type of power plant will provide the answer. This unit is capable
of turning a 3.5” (90mm) propeller and will drive a boat weighing about 25lbs.
The Monahan Steam Models range of oscillating cylinder steam engines has been
specially designed with the “beginner to steam” in mind, as well as the more
experienced steam engine operators who appreciate the simplicity and
reliability of this type of engine.
All Monahan Steam Models engines are double acting,
reversible and self starting. Proportional speed control and reversing requires
only one a single channel on the radio and one servo for the operation of the
steam reversing valve. Oscillator type engines once set up correctly have
proved to be a very reliable and long-lived engine.
Just a few advantages of the “Mobius” engines are, the
cylinder blocks are made from bearing bronze to provide an extra long life
opposed to the use of brass and the stainless steel crankshaft is supported
with precision stainless steel sealed ball bearings opposed to bronze or brass
bushings commonly found in most other manufactured engines on the market.
Another advantage incorporated into the design is the use of bearing bronze for
the big ends of the piston rods that connect to crankshaft. Viton O-rings
provide sealing for the pistons and the cylinder covers are removable opposed
to being pressed into the cylinder blocks should the O-rings ever need to be
replaced.
The model is comprised of two main parts; our “Cambria Vertical Steam Boiler” and our compact powerful “Mobius Twin Cylinder”
marine steam engine. The boilers are of the centre flue type with multiple
cross tubes. Heat is provided by a ceramic gas burner and the recommended gas
is a butane/propane mix up to a maximum of 60% butane 40% propane. In warm
ambient temperatures, straight butane can be used. The “Cambria” Vertical boilers have a
water capacity of about 600ml and steam can be raised in about 5-6 minutes.
Run times on one boiler full of water are between 35 and 55 minutes dependent
on pressure, engine speed and size of boat.
The maximum running pressure of these engines is 45lbs per
square inch or 3bar. For optimum performance and duration we have found that
the pressure of 25/30psi or 2bar to be the best.
The Mobius Vertical Steam Plants are completely manufactured and tested
in-house. The steam plants are sent out from our factory as a complete ready to
run models, only requiring the user to supply either a refillable gas tank or a
commercially available disposable gas canister avail at most sporting goods
retailers.
The Mobius Vertical Steam Plant consists of our Cambria Vertical Steam
Boiler, Mobius Twin Cylinder Steam Engine, oil/water separator tank, gas
burner, pipe work, gas control valve, steam control valve wood lagging,
stainless steel boiler bands, water gauge, pressure gauge and safety valve all
mounted on a stainless steel base. Each complete ready to run steam plant
features all copper plumbing installed and factory welded.
|
|
|
|